CZ DUTY 4.0 F
Specs at a glance
About this product
Suppressor owners tend to shop for hosts with one question first: is the barrel threaded. On CZ's new DUTY 4.0 the answer is no. The factory barrel is a plain 4-inch tube, so this is not a can-ready pistol out of the box, and we would rather say that plainly than let you find out at the dealer. What it is: a new-generation striker-fired 9x19mm with a serialized internal chassis, a modular fiberglass-reinforced polymer grip frame and a slide milled for direct-mount red dots.
The compact C holds 15+1, or 17+1 with the extended base plate, weighs 770 g and stands 135 mm tall. The full-size F steps up to 17+1 and 19+1 extended at 780 g and 143 mm. Both share the 7.4-inch overall length and 1.3-inch width, a refined SFDA trigger at 5.6 lbs with a short 4 mm reset, and fixed sights. MS versions add a manual thumb safety. MSRP is $729 across the line.
What is new under the slide is the serialized modular chassis. The serial number lives on the internal chassis, not on the polymer grip, so the polymer grip is a part you can change while the gun stays the same gun. Around it CZ put a reworked SFDA striker trigger, rated at 25 ± 4 N (5.6 ± 0.9 lbs) with a 4 mm (0.16 in) reset and 9 ± 1 mm (0.4 ± 0.04 in) of travel, and a slide cut for direct-mount optics. CZ's own photos show it wearing Holosun, Aimpoint and Shield red dots.
The F is the service-size frame: 143 mm (5.6 in) tall, 780 g (27.7 oz) unloaded, 17+1 rounds of 9mm on board and 19+1 with the extended floor plate. The longer grip fills a big hand and settles the gun between shots.
This version has no external safety lever. It relies on three automatic safeties, firing pin block, trigger safety and drawbar safety, and the trigger is the same as on the MS model. Shooters who prefer a lever should pick the MS.
Best fit: the belt, the nightstand and the range; the version to buy if you rarely need to hide the gun. Shooters coming from a CZ 75 will recognize the grip angle; owners coming from any other striker gun will notice the trigger first.
This pistol is not an NFA item, so it moves the same way as any handgun: we ship it to the FFL dealer you choose, and the transfer happens at their counter. The dealer applies your state's handgun rules at pickup. If you already have a dealer handling your suppressor paperwork, they are usually a natural choice for this transfer as well; just confirm they accept inbound handguns before you order.
Specifications
| Caliber | 9x19mm (9mm Luger) |
| Magazine capacity | 17+1 (19+1 with the extended base plate) |
| Barrel length | 102 mm (4 in) |
| Overall length | 188 mm (7.4 in) |
| Width | 33 mm (1.3 in) |
| Height | 143 mm (5.6 in) |
| Weight (empty magazine) | 780 g (27.7 oz) |
| Frame | fiberglass-reinforced polymer |
| Trigger | SFDA striker-fired |
| Trigger pull | 25 ± 4 N (5.6 ± 0.9 lbs) |
| Trigger reset | 4 mm (0.16 in) |
| Trigger travel | 9 ± 1 mm (0.4 ± 0.04 in) |
| Safeties | Firing pin block, trigger safety, trigger bar safety |
| Sights | Fixed |
| Threaded barrel | No |
| Optics | Direct-mount optics ready |
| Manufacturer | CZ (Česká zbrojovka) |
| MSRP | $729 |
Frequently asked questions
- Can I run a suppressor on the DUTY 4.0 as it comes from CZ?
- Not as shipped. The factory 4-inch barrel has no threads, so a suppressor would need a different barrel, which is not part of the package.
- What does MS mean on a DUTY 4.0 model name?
- MS marks the versions with a manual thumb safety. It sits alongside the firing pin block, trigger safety and trigger bar safety found on every DUTY 4.0.
- How many rounds does the CZ DUTY 4.0 F hold?
- 17+1 with the standard magazine and 19+1 with the extended base plate.
- Can I put a red dot on it?
- Yes. The slide is optics-ready with direct mounting; CZ's photos show Holosun, Aimpoint and Shield dots fitted.